# Help using otmorris module

**URL:** <https://openturns.discourse.group/t/help-using-otmorris-module/161>\
**Category:** Methodology\
**Tags:** sensitivity-analysis\
**Created:** [October 4, 2021, 2:04pm UTC](https://openturns.discourse.group/t/help-using-otmorris-module/161 "2021-10-04T14:04:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Flore](https://avatars.discourse-cdn.com/v4/letter/f/3d9bf3/32.png) [@Flore](https://openturns.discourse.group/u/Flore)\
**Post date:** [October 4, 2021, 2:04pm UTC](https://openturns.discourse.group/t/help-using-otmorris-module/161/1 "2021-10-04T14:04:05Z")

</div>

Hello  
I planned to run a Morris experiment for my computational model.  
There are a lot of input parameters (about 40) and several scalar outputs (about 10 results)

The results will be loaded from a CSV file (because my computations are done with Ansys)

should I compute Morris elementary effects for each output one by one ?

thanks in advance !

Flore

---

<div class="post-metadata">

**Author:** ![schueller](https://yyz2.discourse-cdn.com/free1/user_avatar/openturns.discourse.group/schueller/32/3_2.png) [@schueller](https://openturns.discourse.group/u/schueller)\
**Post date:** [October 5, 2021, 7:42am UTC](https://openturns.discourse.group/t/help-using-otmorris-module/161/2 "2021-10-05T07:42:19Z")

</div>

You should make your wrapper multivariate so as to reuse evaluations across outputs.
